ASK Tools

Fastest adjusting frame clamp on the market, speed clamping nuts designed for fast adjustment and secure hold. Cross drilled to slide easily on the rods until they come up against a corner clamp where the threads engage, to release one turn then they are free sliding. includes 4 corners with glass filled nylon inserts, 4 speed clamping nuts. 20 threaded rods that clamp up to 58cm square

This flush cutting saw can be used anywhere as the 22 tpi Japanese style tooth cuts on the pull stroke, single sided blade

This flush cutting saw can be used anywhere as the 22 tpi Japanese style tooth cuts on the pull stroke, doubled sided blade

This gauge can be used for machine set up for the precise mitres for 4, 5, 6, 8, and 12 equal sided shapes

For quick accurate marking of dovetails. With riding ledges on both sides these 50 x 50mm markers can be flipped over to mark both sides of the dovetail. Designed so that the entire leading edge is riding onthe reference face even when working at the edge of a board. the relieved corners allow perfect seating. the set has 1:6 for softwoods and 1:8 for hardwoods.

This knife has an oval handle for comfort and with grooves for grip. It comes with 12 razor sharp high carbon blades that are easy to hone. removable magnetic end cap will store 6 blades without rattling & solid brass collet on an anodized aluminium body allows quick blades change.

Chair Doctor is a glue for much more than repairing chairs, it will repair any loose joint in furniture. An injection of chair doctor will swell the joint and then bond it. Its low viscosity allows it to soak into and penetrate deep into a loose joint. The wood swells and then the glue freezes the wood in its swollen state providing a tight strongly bonded joint. Kit includes 1 syringe & 3 sizes of blunt tip needles.

Cuts a fixed radius curve on an edge, different radius cutter at each end, one tool cuts 1.5mm & 3mm, the other tool cuts 5mm & 6mm. Cuts on the push and pull stroke removes material quickly, accurately ground for final honing.

The dividing rule makes it easier to divide wood into equal parts without error. The swivelling pins have flats to hold the rule firmly. the holes are numbered to divide  a work piece up to 8" wide into 2 - 10 equal divisions.

The dovetail guides clamp in position and hold the saw at the correct angle, low friction magnets in guide hold saw in perfect alignment. You still need to chop out waste from the tail and pins (Saw sold separately)

The dovetail guides clamp in position and hold the saw at the correct angle, low friction magnets in guide hold saw in perfect alignment. You still need to chop out waste from the tail and pins (Saw sold separately)

A 50 x 216mm blade 22tpi dozuki tooth form dovetail saw for cross & rip cuts

The flat bob doesn't roll endlessly, low centre of gravity, stabilizes rapidly, poit easily visble from above, The design ecorages accuarte marking, hold flat agaist the wall and mark through body, Windlass holds 2.4m of btaided nylon that doesn't twirl.

The hardened steel wheel cutter scribes perfectly at any point of its circumference. since it cuts wood fibres rather than tearing it marks cleanly, even on cross grain. The wheels single sided bevel pulls the gauge face against the stock maintaining accuaracy. the cutting edge is at the extreme end of the rod, useful for transfering dimensions such as tenon shoulder and mortise depth. The retracts into the the face of the gauge for staorage and protection. This version is non graduated with micro adjust one revolution of the knurled thumb screw adjusts the wheel 1/32"

The hardened steel wheel cutter scribes perfectly at any point of its circumference. since it cuts wood fibres rather than tearing it marks cleanly, even on cross grain. The wheels single sided bevel pulls the gauge face against the stock maintaining accuaracy. the cutting edge is at the extreme end of the rod, useful for transfering dimensions such as tenon shoulder and mortise depth. The retracts into the the face of the gauge for staorage and protection. This version is imperial with micro adjust

The hardened steel wheel cutter scribes perfectly at any point of its circumference. since it cuts wood fibres rather than tearing it marks cleanly, even on cross grain. The wheels single sided bevel pulls the gauge face against the stock maintaining accuaracy. the cutting edge is at the extreme end of the rod, useful for transfering dimensions such as tenon shoulder and mortise depth. The retracts into the the face of the gauge for staorage and protection. This version is metric with micro adjust.