Flipstop from Kreg

The perfect kit to setup a measuring system for your miter saw, radial arm saw, or drill press. The kit contains (4) 2' pieces of Top Trak , 1 Production Stop, (1) 12' L-R reading self-adhesive tape, (1) 12' R-L reading self-adhesive tape. Detailed instructions.

Curved design lifts out of the way to bypass the stop allowing you to square an end and cut to length without moving the stop. Attaches to T-trak in fence with 1/4" hex bolt.

This "Rock Solid" stop features dual cursers that allow it to be read from either side of the blade. Drops onto the top of the fence for easy removal. Perfect for repetitive, high-production applications.

Our "Perfect Miter" attachment is designed to support the mitered end of a board so that the sharp point of the miter is not damaged while cutting. The attachment also allows the mitered end to be measured off of two points of contact instead of the toe of the miter, creating increased accuracy. A must-have for picture framers or anyone who routinely cuts miters. A slot is machined into the attachment which enables it to be attached to the Production Stop or Flipstop with a simple carriage bolt.

Called Top Trak because it mounts to the top-side of a shop-made 3/4" thick fence, this extremely versatile and rugged anodized aluminum extrusion works well with various woodworking machines. Trak features a self-aligning L-shaped mounting foot for easy installation to a shop-made fence. Just drill 1/8" holes through the back of the extrusion and secure with the included mounting screws. The top of the track contains a recess for attaching a self-adhesive 1/2" measuring tape, sold below.

Called Top Trak because it mounts to the top-side of a shop-made 3/4" thick fence, this extremely versatile and rugged anodized aluminum extrusion works well with various woodworking machines. Trak features a self-aligning L-shaped mounting foot for easy installation to a shop-made fence. Just drill 1/8" holes through the back of the extrusion and secure with the included mounting screws. The top of the track contains a recess for attaching a self-adhesive 1/2" measuring tape, sold below.

Our Heavy Duty Trak is an L-shaped, anodized aluminum extrusion that is extremely straight and perfect for heavy use commercial applications. Contains four T-slots which accommodate the head of a standard 1/4" hex bolt. This is the same extrusion that is included in the Deluxe Miter Gauge System. A 1/2" recessed indentation runs along the top and frontside of the trak for easy application of a self-adhesive measuring tape. This trak is intended to be mounted to a shop-made subfence with standard 1/4" bolts (not included).

Our Heavy Duty Trak is an L-shaped, anodized aluminum extrusion that is extremely straight and perfect for heavy use commercial applications. Contains four T-slots which accommodate the head of a standard 1/4" hex bolt. This is the same extrusion that is included in the Deluxe Miter Gauge System. A 1/2" recessed indentation runs along the top and frontside of the trak for easy application of a self-adhesive measuring tape. This trak is intended to be mounted to a shop-made subfence with standard 1/4" bolts (not included).